img
img
NEWS CENTER

Anti-Static Shielding Bag

Release time:

2020-01-10 15:05

The anti-static floor room should maintain the necessary temperature and temperature, under normal circumstances, the temperature should be less than 28 °C, and the temperature should be maintained between 50% and 70%, and it is not suitable to be less than 40%. That kind of temperature and temperature can keep the wooden floor relatively stable, and if the ecological temperature is not reached, you can use a humidifier to humidify. If there is a large-scale flooding or partial blister, there must be open water to stay, should be immediately blotted away with a damp cloth, and make the floor tile ecological dry, do not use an electric heater to air dry or expose to the sun.
 
In addition, it should not be scrubbed with liquids such as harsh diesel and soap to prevent the gloss of the surface of the floor tiles. The sand and gravel remain on the surface of the floor tiles for a long time, and after walking back and forth, the marks of sand and gravel damage will appear on the surface of the floor tiles. In addition, dust, hard-soled shoes, alloy sharps, and tempered porcelain tiles are all the natural enemies of the "skin" of floor tiles, especially in the spring of the Northeast, where there is more sand and dust, and the problem of dust is more significant. In order to reduce particle damage to the floor tiles, it is important to maintain floor cleaning. Floor pads can be placed at the entrance, and the flat sandals can be replaced before entering the room, but weak shoe covers can still cause some sharp sand on the surface to scratch the floor tiles.
 
Because when everyone walks around, the boots will rub against the floor tiles and cause static electricity, and the charged ionization will be moved by the dust in the gas on the surface of the floor tiles, which will cause necessary hazards to notebook computer rooms, emergency command centers, automation factories and other sites. Thermally conductive floor tiles are also antistatic floors with thermal conductivity, which can quickly lead away the static electricity caused, and then maintain the facilities in the computer room, because the antistatic floor has conductive fibers, and the floor tiles should be paved with copper foil under the floor tile decoration project, and the copper foil should be connected to the underground buried conductor, so that the static electricity caused by it immediately enters the world, and then promotes the floor tile to ionize without static electricity.
 
The component breakdown hazard caused by electrostatic discharge is a widespread and serious electrostatic injury in the automated manufacturing industry, which is divided into hard breakdown and soft breakdown. Antistatic feeding boxes, component boxes, logistics boxes, and transport trays must be used in the transmission and storage of electrostatic sensitive components and printed circuit boards in the process of processing, so as to avoid damage caused by static electricity accumulation. When packaging as machinery and equipment, it is necessary to use anti-static shielding bags, plastic bags, packaging bags, baskets, etc., to prevent static electricity hazards in the transportation process.
 

Anti-Static Shielding Bag

RELATED NEWS

2024-03-06

The practicality of anti-static shielding bags

Protecting electronic components: Anti static shielding bags can effectively prevent static electricity from damaging electronic components and avoid damage caused by static discharge to components

2020-01-10

Anti-Static Shielding Bag

The room with anti-static flooring should maintain the necessary temperature and temperature. Generally, the temperature should be less than 28 ℃, and it is better to maintain the temperature between 50% and 70%, but not suitable for less than 40%. That kind of temperature can keep the wooden floor relatively stable. If the ecological temperature cannot reach it, a humidifier can be used to increase humidity. If there is a large amount of water immersion or partial water bubbles accidentally, there must be water lingering. It should be immediately absorbed with a damp cloth and the floor tile ecology should be dry. Do not use an electric heater to air dry or expose it to the sun.

2019-12-05

Factors affecting the heat sealing strength of aluminum foil pharmaceutical packaging

For aluminum foil drug packaging, the quality is largely reflected in the heat sealing strength of the product. Therefore, it is necessary for us to analyze the factors that affect the heat sealing strength of aluminum foil drug packaging, which is very necessary for improving the quality of products. Let's learn together with the packaging editor of Yinglian about the six factors that affect the heat sealing strength of aluminum foil pharmaceutical packaging.

SVG图标库请自行添加图标，用div包起来，并命名使用